Interplast produse

Como floor Oxygen Barrier plastic pipe

Plastic pipe manufactured from special type polyethylene resistant to high temperatures with oxygen barrier. The production and the quality control of the pipe are in accordance with European Standard EN ISO 22391 and German standard DIN 16833. The physical and mechanical properties of the pipe are certified by German Institute SKZ, certificate number A 401. The oxygen barrier is certified by German Institute MPA – NRW according to standard DIN 4726. The pipe’s cross section for the underfloor system is 17 x 2 mm.

Manifold group

Bar type manifolds of nickel-plated brass, without connections, nominal diameter 1” or 1¼’’ with 3/4” threading (Eurocone). The flow manifold bears Alen type valves or flow meters, which regulate the supply of each circuit based on the system's design. The return manifold has a valve for the installation of thermoelectric actuators, for the independent operation of each circuit

Brass fittings

Brass fittings are available for the entire range of materials, for the integrated installation of the group. Among them: Connecting coupling Φ17x2 – ¾”(Eurocone), terminal ‘T’s, automatic daerators, filling valves as well as special couplings for installing thermometers at returns and the central intake

Metal panel

Metal panel, suitable for wall mounting, constructed from galvanized steel, 1mm in width, painted with electrostatic paint. It is adjusted to a height of up to 815 mm. Bears an adjustable removable frame for protection from the plaster, which sets the panel depth from 115 to 165mm.

Castellated Panel

Manufactured of expanded polystyrene with polyethylene film and special arrangement on its surface (plugs). The panel offers heat insulation, sound insulation and humidity insulation from the plaster coating. It ensures that the pipe is perfectly supported and covered by the plaster coating. It allows that the layering distances of circuits are observed at a 7.5cm and 15cm step. Item dimensions are 1350 x 750 mm² and they are available in boxes of 14.. The panel’s compressive strength is 150kPa according to EN 826. The total height of the panel (plub + base) is 4.5cm. The thermal conductivity factor is 0.034 w/mK and thermal resistance is 0.4m²k/W.

Perimeter wall insulation

Manufactured from polyethylene foam 8mm thick and 150mm high. It has nylon film on the lower part of its front and a special fixing adhesive strip on the back.

Thermoelectric actuators

Thermoelectric actuators are connected through a communication base with the corresponding thermostat and open or close the underfloor heating circuits. In this way we can achieve independency in the areas of a house and as a result more economical operation and selection of different temperatures in each heating space.